Waterstop Accessories

Waterstop Hog Rings and Pliers

Don't be confused by the weak agricultural steel rings; JP Hog Rings are copper-clad, hill-shaped rings made especially for waterstop installation. The high-strength

steel prevents pullout due to stress and the #3 size fits all Earth Shield TPE-Rubber Waterstop profiles with equal ease.

Our Hog Ring Pliers are durable, lightweight tools which have a unique torsion spring for ease of use and set screw to ensure a perfect hog ring closure every time.

Hog Rings and Pliers PDF Product Literature

Factory Installed Brass Eyelets

All ribbed Earth Shield Waterstop profiles are available with factory installed brass eyelets. The eyelets provide for a convenient and durable tie-off point for wire tying the waterstop to the steel reinforcement prior to the concrete pour. JP Specialties installs the brass eyelets at 12" centers, between the last two ribs, to provide maximum resistance and rigidity to the poured concrete weight.

Note to specifier: To add factory installed brass eyelets to your Earth Shield specification, simply precede the specified part number with "EY." Example: If you are specifying JP636 and want the optional eyelets, call out part number EYJP636.

ElectroTest Spark Tester

The ElectroTest is a high frequency generator which is used for the detection of pinholes in factory and field welds. The instrument produces a high frequency

spark, which can be traced along the seam of the waterstop weld and will produce a definite change in both appearance and sound when a defect is detected.

ElectroTest Spark Tester PDF Product Literature

Stainless Steel Waterstop Welding Jig

Our stainless steel waterstop welding jig is designed to perfectly align the straight legs of Earth Shield Stainless Steel Waterstop, securing the two lengths, and making for significantly easier field welding.

Waterstop Protector

JP Specialties' Waterstop Protector is used to protect embedded waterstop for extended periods of time. Fits 4", 6" and 9" waterstop profiles. Constructed with heavy-duty, 20 gauge, electrogalvanized steel. Other grades, gauges, and metals are available.

Waterstop Protector PDF Product Literature

CH2M Hill Specification

The CH2M Hill Waterstop Protector is manufactured with 12 gauge, grade 304 stainless steel, prepunched 12 inches on center for a 3/8" anchor per CH2M Hill specifications. Used to protect embedded waterstop for extended periods of time.

CH2M Hill Waterstop Protector Product Literature

JP MixRite Mixing Paddles

The JP MixRite is the perfect solution for all your mixing needs (and is ideally suited for mixing our VEN epoxies). The heavy-duty, solid-steel paddle is built to last and features a hexagonal shaft which prevents slippage in the drill chuck. The paddle edges are rounded to prevent sparring in the mixing bucket.